Port-a-tyer
OVALMATIC® Model 9500 Port-A-Tyer® Portable Pulp Unitizing System, designed for use in both production and warehouse operations where:
- Additional manpower is not available
- Limited space is available
- Unitizing is required at multiple locations
- A lower cost unitizing alternative is required
PORTABILITY:
Easy to move using forklift truck
Requires only primary power supply
Easily dismantled for transport
Fully self-contained
FRAME:
Adjustable rear unit stack aligners for varying unit sizes
Efficient use of floor space requirements – feed and offload on one side
Uses globally recognized and proven Model 9500 Unityer® components
Adjustable rear unit stack aligners for varying unit sizes
Automatically adjusts for varied stack heights
Sturdy load tables support unit – no conveyors required
OPERATOR FUNCTIONS:
All machine functions are selected via the pushbutton station.
No dedicated operator. Clamp truck driver operates via wireless control
All diagnostic & maintenance messages are clearly displayed in message format
Maintenance reminders, based on cycle count, are displayed
Diagnostic messages aid in troubleshooting operational issues
No facility network required
WIRE HANDLING:
Feed /Tension unit provides a light nip force for feeding and electronic tension control for accurate and repeatable wire tensioning.
Large diameter, hydraulic motor driven F/T wheels prevent wire distortion.
Easy to thread Wire Dispenser minimizes tangles
TRACK:
The time proven low friction passive track design along with Ovalmatic® quality wire eliminates the need for lubrication – no pulp contamination
Teardrop shaped track groove and sealed corner bearings provide reduced friction operation.
Track is spring loaded requiring no pneumatic or hydraulic track opening devices.
TWISTER HEAD:
Nearly all twister functions are accomplished in one complete stroke of the hydraulic twister cylinder.
The gripping function is accomplished by a cylinder driven reversible gripper with two gripping surfaces available.
The “floating” feature of the gripper assembly reduces knot stresses during the twisting operation.
HYDRAULICS:
Custom designed hydraulic system manifold minimizes hose connections, the precision wire tension sensors operate in all conditions, and it uses an integrated air/oil in hydraulic power unit
No cooling water is necessary
OVALMATIC® MODEL 9500 PORT-A-TYER® MACHINE STANDARD SPECIFICATIONS
|
RECOMMENDED TYING WIRE: |
OVALMATIC® quality Unitizing wire |
|
TOP PLATES: |
Removable top plates for maintenance operations |
|
HYDRAULICS: |
Self-contained hydraulic power unit using Parker directional valves and Parker pressure compensated piston pump |
|
ELECTRICAL SERVICE: |
380 to 575 VAC, 3 PH, 50/60 Hz motors. |
|
ELECTRICAL MOTORS: |
Hydraulic Pump: Hydraulic Cooler: 7.5 kW (10 HP) 380 – 575 VAC, 3 PH, 50/60 Hz 0.5 kW (0.75 HP) 380 – 575 VAC, 3 PH, 50/60 Hz 1.5 kW (2.0 HP) 380 – 575 VAC, 3 PH, 50/60 Hz 0.5 kW (0.75 HP) 110/220 VAC, 1 PH, 50/60 Hz Wire Guide: |
|
ELECTRICAL CONTROL: |
Siemens S7 Programmable Controller. Other controllers available 24 VDC control voltage |
|
ELECTRICAL COMPONENTS: |
All components are CE/UL/CSA recognized. Standard equipment environmental sealing IP55 (NEMA 12) |
|
ELECTRICAL WIRING: |
Proximity Switches: 0.33-0.52 mm2 (22-20 AWG) stranded Standard: 2.08 mm2 (14 AWG) stranded |
|
COOLING/HEATING: |
Air/oil heat exchanger / Oil Heater 380 – 575 VAC, 3 Ph, 50/60 Hz 1.5KVA |
|
PNEUMATICS: |
Required for auto air blast feature |
|
MACHINE WEIGHT: |
7210 kg (16,000 lbs) |
|
MACHINE HEIGHT: |
3621 mm (142.5 in.) erected |
|
MACHINE LENGTH: |
5657 mm (223 in.) erected (excluding coil carrier) 7965 mm (314 in.) disassembled for transport |
|
MACHINE BASE WIDTH: |
1800 mm (71 in.) |
|
MAXIMUM UNIT SIZE: |
1500 mm (59 in.) wide 1870 mm (74 in.) high 1270 mm (50 in.) long |
|
TEAR DOWN HEIGHT: |
1820 mm (72 in.) |
|
TOP PLATE HEIGHT: |
635 mm (25 in.) minimum |
OVAL International® specifications are subject to change without notice.